2 in. Schedule 40 PVC 90-Degree Straight/Street Elbow Fitting NSF SCH40 ASTM D2466 2" SLIP x 2" SPIGOT

247Garden 2-Inch Schedule 40 PVC 90-Degree Street Elbow – Slip x Spigot | NSF Certified | SCH40 ASTM D2466 Rated

The 247Garden 2-Inch Schedule 40 PVC 90-Degree Street Elbow Fitting is a professional-grade plumbing component engineered for high-performance water distribution, drainage, and irrigation systems. Featuring a 2" slip socket (female end) on one side and a 2" spigot (male end) on the other, this street elbow is designed to make tight 90° directional changes in piping layouts while saving space and reducing the number of joints required. This fitting is ideal for use in both pressurized and non-pressurized systems.

Molded from durable, rigid white PVC and certified to NSF standards for potable water, this SCH40 elbow also complies fully with ASTM D2466 for dimensional accuracy and pressure performance. Whether you're plumbing a swimming pool system, a greenhouse manifold, or a commercial water line, this 2-inch street elbow offers superior flow control and leak resistance.

Product Features:

• Size: 2-Inch Slip x 2-Inch Spigot

• Angle: 90 Degrees

• Material: High-strength white PVC (Schedule 40)

• End Types: Slip socket accepts 2" nominal PVC pipe; spigot fits into 2" PVC slip fittings

• Standards: Meets ASTM D2466, NSF-certified for potable water

• Pressure Rating: Up to 280 PSI at 73°F (non-shock)

• Temperature Rating: Max 140°F (60°C)

• Corrosion Resistance: Excellent resistance to common chemicals, salts, acids, and UV (when painted or protected)

Advantages of Using a Street Elbow:

Unlike a standard slip x slip elbow that requires two pipe ends and often an additional coupling, a street elbow connects directly into another fitting—offering a more compact and streamlined installation. This reduces both material cost and time spent on assembly, making it ideal for complex or space-constrained systems.

Application Examples:

1. Swimming Pool & Spa Systems
   Ideal for plumbing pump outlets, return lines, and filter setups where large-diameter flow paths are needed but space is tight. Reduces the need for added couplings, lowering installation complexity.

2. Agricultural & Greenhouse Irrigation
   Perfect for routing 2" supply lines at right angles without sacrificing pressure or flow. Useful in header layouts, valve boxes, and distribution manifolds.

3. Commercial Plumbing & Mechanical Rooms
   Enables precise pipe turns when entering large fittings or valve inlets in control boxes and backflow assemblies. Simplifies layout while preserving structural strength.

4. Aquaponics and Large Hydroponics Systems
   Helps navigate directional turns in systems handling high water volume and nutrient flow. Reduces joint count, which minimizes leak points.

5. Industrial Water Treatment Systems
   Used in piping systems for tanks, pumps, and filtration units that require clean directional transitions at 90 degrees with high flow reliability.

Installation Instructions:

1. Prepare surfaces by cutting the PVC pipe square and deburring edges.

2. Dry-fit all parts to verify alignment and fit.

3. Apply primer to both the slip socket and spigot connection ends.

4. Use PVC solvent cement liberally while surfaces are wet with primer.

5. Insert and twist the spigot into the slip socket and hold for 30 seconds.

6. Allow full curing time based on temperature and solvent manufacturer's specs before pressurizing the system.